Scroll to Top

iPhone 18 Pro Max Charging Circuit Schematic

Understanding modern smartphone charging architecture is an important part of advanced smartphone hardware troubleshooting and repair.

This documentation brings together the major charging-related components, power paths, battery connections, and associated circuit sections in a single schematic for easier understanding and technical training.

iPhone 18 Pro Max Charging Circuit Schematic by ODOX

Figure 1: iPhone 18 Pro Max Charging Circuit – Rev 3.0

Download the Schematic PDF

iPhone 18 Pro Max – Charging Circuit

Get the Rev 3.0 conceptual schematic documentation in PDF format.

View PDF Download Schematic

Major Circuit Sections

The schematic covers several important charging and power management components. The following sections are identified in the conceptual circuit documentation.

1. USB-C Input Section

The J4 USB-C connector section includes the PP_VBUS1_E85 input connections, representing the wired charging input path.

2. eFuse – U4800

The EFUSE section includes control and protection-related signals such as EFUSE_EN, EFUSE_OVLO, EFUSE_ILM, and the PP_VBUS1_EFUSE_OUT power path.

3. Secondary Charger – U4100

The SEC_CHARGER block includes charging-related power connections, LX1/LX2 switching nodes, and battery current-sensing connections.

4. Main Charger – U4000

The VAIKATO_CHARGER block is represented with its associated input, output, switching, and current-sensing connections.

5. Wireless Charging – U4400

The WL_CHGR section includes wireless charging-related connections, including coil interfaces and associated capacitor connections.

6. Battery Interface – J3

The battery connector section includes battery voltage sensing connections, battery supply, SDA, and SCL signals.

7. Battery Power Interface – U4200

The BP_IC block is represented with connections to PP_VDD_MAIN and battery-related sensing and interface signals.

8. Power Management – U3300

The PMU section illustrates the VDD_MAIN power connections and associated power-management interfaces in the conceptual schematic.

Important Power Lines and Signals

Some of the important power nets and signals identified in this schematic include:

  • PP_VBUS1_E85 – USB-C input power net.
  • PP_VBUS1_EFUSE_OUT – eFuse output power net.
  • PP_BAT_VCC – Battery supply connection.
  • PP_VDD_MAIN – Main system power rail.
  • PP_VDD_CHARGER_OUT – Charger output power net.
  • LX1 / LX2 – Switching-node connections.
  • ANALOG_CHARGER_ISNS – Charger current-sensing signals.
  • ANALOG_BATT_VCELL – Battery voltage-sensing connections.
Educational Disclaimer: This schematic contains conceptual connections intended for educational purposes and easier understanding of the charging section. Only conceptual connections are included. Refer to the official bitmap schematic for detailed connections. This document should not be treated as a complete service schematic.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top